Cerlic ITX TSS sensor for MLSS

  • A high accuracy, online, NIR (near infrared) total suspended solids (TSS) sensor for MLSS (mixed liquor suspended solids)
  • Built-in self-cleaning (NOT clipped on) with water or compressed air - no moving parts for low maintenance
  • NO service agreements
  • Range: 0 » up to 20,000mg/L (ppm) or 2% TSS - dependent on sludge
  • Process connection: handrail or slide rail mount
  • Temperature: 0 » 60°C
  • Enclosure: IP68 (submersible)
  • Life expectancy: sensor 10yrs 
  • Accuracy: ±0.5% FS (TSS)
  • Outputs: 4»20mA or optional Profibus DP from BB1 (single sensor - link) or BB2 (up to 4 sensors - link) controller
  • Wetted Materials: 316SS & BK7 glass
  • See the self-cleaning in action - YouTube demo
  • See the telescopic rod with rail mounting kit in action - YouTube demo
Back to top
 

Cerlic ITX-IL in-line TSS sensor for RAS / WAS / DAF thickened sludge

  • A high accuracy in-line NIR (near infrared) total suspended solids (TSS) sensor for RAS (return activated sludge) / WAS (waste activated sludge) & some DAF (dissolved air floatation) thickened sludge
  • Built-in self-cleaning (NOT clipped on) with water or compressed air - no moving parts for low maintenance
  • NO service agreements
  • Range: 0 » up to 50,000mg/L (ppm) or 5% TSS - dependent on sludge
  • Process connection: hot-tap via isolation valve prevents having to stop process in case of maintenance
  • Temperature: 0 » 60°C
  • Enclosure: IP65
  • Life expectancy: sensor 10yrs 
  • Accuracy: ±1% FS (TSS)
  • Outputs: 4»20mA or optional Profibus DP from BB1 (single sensor - link) or BB2 (up to 4 sensors - link) controller
  • Wetted Materials: 316SS & BK7 glass 
Back to top
 

Cerlic CMC high concentration TS sensor

  • Micowave, high concentraion total solids (TS) sensor
  • True phase-shift microwave technology provides stable signal & prevents empty pipe errors
  • No moving parts for long life & low maintenance
    • Angled sensor (antenae) surfaces for self-cleaning
  • Designed for digested, dewatered or primary sluge
  • Range: up to 30% TS (300,000mg/L or ppm)
  • Process connection: wafer flange for DN50 » 300, insertion type model also
  • Conductivity: varies depending on pipe size - refer datasheet
  • Process pH: 2.5» 11.5
  • Temperature: 0 » 100°C
  • Pressure: PN16 (recommend at least 1.5bar to remove air from sludge / biosolids)
  • Supply: 85»264Vac
  • Display: remote mount with supplied 10m cable
  • Enclosure: IP65
  • Accuracy: ±1% FS (TSS)
  • Outputs: 2 x 4-20mA or HART analogue outputs - TS concentration & sludge temperature
Back to top
 

Cerlic Solido TSS sensor for RAS / WAS / MLSS

  • A high accuracy NIR (near infrared) total suspended solids (TSS) sensor for RAS (return activated sludge) / WAS (waste activated sludge) / MLSS (mixed liquor suspended solids)
  • Plug and play connection to the MultiTracker handheld controller
  • Range: 0 » up to 50,000mg/L (ppm) or 5% TSS - dependent on sludge
  • Depth: up to 12m
  • Temperature: 0 » 50°C
  • Enclosure: IP68 (handheld MultiTracker IP65)
  • Accuracy: ±1% FS (TSS)
  • Output: graphical (backlit) display, alarms (vibration & sound) for 2 x adjustable levels (high & low)
  • Datalog up to 250 samples into customised folders before PC sync via supplied cable & software
  • Wetted Materials: 316SS, BK7 glass & PUR (cable)
  • NEW! With the latest Firmware update of the MultiTracker (v2.3) the Solido can now store & use three separate calibration curves
    • Operators can now datalog for three separate applications (e.g. MLSS, RAS & effluent) with the one device, without having to re-calibrate for each between uses!
    • Head to the MultiTracker page (here) to download the updates
Back to top