KEM TRICOR Coriolis mass flow meters

  • Wide range of variations available:
    • Gas & liquids
    • Flange or threaded process connections
    • Huge span of flow ranges - 3 » 230,000kg/hr **low flow models coming!**
    • High temperature models available
    • Hgih pressure models available
  • Supply: 24Vdc or mains AC
  • Outputs: 2 x 4-20mA (flow rate, total, density or temperature), flow switches, totaliser, pulse output (0.5 » 10,000Hz), & a choice of RS-485 (MODUS RTU) / HART / Foundation Fieldbus (FF), batch control
  • Intergral or remote mounting electronics / display
  • IECEx Ex ia & Ex d versions available
Back to top
 

Eletta M series

  • Blind flow meter, high accuracy, 1:10 turn down
    • Liquids and non hazardous gases
    • Built-in Pressure vs Temperature curves for gases!
  • 2 wire loop powered 4 - 20mA output
  • Controller interface common to all Classic pipe sections 
  • Using the Eletta Combo plate, can be added to existing S series or even TIVG installations to provide analogue output in addition to the indicator / flow switch functions of the existing control.
Back to top
 

Eletta D series flow meter, totaliser & switch

  • Newest in the Classic range
  • Uses common pipe sections and can be used to upgrade other of the Eletta Classic controllers
  • Programmable, digital back-lit display that can be rotated electronically through 360°
  • Multipoise installation of instrument
  • Isolated 4 - 20mA output linear to flow
  • Frequency output 200 - 1000Hz, linear to flow
  • 2 independent relay outputs for alarms
  • Resettable totaliser function
Back to top
 

Eletta R series

  • Blind flow monitor with analogue 4-20mA and frequency outputs
  • Alao available with Hart® protocol
  • Uses common pipe sections across the Eletta CLassic range
Back to top
 

Eletta S series flow sensor with gauge & switches

  • Extremely durable & long lasting flow sensor
    • Purely mechanical (requires no power)
  • Large gauge (Ø120mm) indication of flow rate
    • Direct reading / customised dials available
  • Process connection: DN15»40 threads (BSPP or NPT) or DN15»500 DIN / ANSI wafer flanges
  • Flow range: varies depending on size of pipe section - refer datasheet
    • 0.4 » 25,000L/min
  • Repeatability: <2% actual
  • Output: standard S2x: 2 x independently adjustable SPDT relays; standard S0x: gauge only
  • Enclosure: we stock IP65 standard but IP43 available also 
  • We carry stock & spare parts to build / repair most common variations.  e.g. S2-GL15, S2-GL25, S2-FA50, S25-GL15, S25-GL25, S25-FA50 & more.
  • NEW! Upgrade your existing flow switch / indicator to a Combo Unit & get 4-20mA analogue output - ask us how.
Back to top
 

Eletta TIVG - DP flow indicator

  • TIVG has been widely installed in the hydro power generation industry.
Back to top
 

Gems Sensors RFO (RotorFlow) paddle wheel flow sensor

  • Paddle wheel flow sensor for visual flow indication & analogue flow measurement
    • Hall effect sensor
  • Materials: polypropylene, brass or stainless steel body
  • Media: dependent on body type
    • -29 » 100°C (65°C ambient), up to 13bar
    • Viscosity: <200SSU
  • Process connections: ¼, ½, ¾ & 1” BSPP (G type) or NPT thread
  • Output: pulse (square wave 4.5 » 24Vdc)
    • Frequency: 15 » 225Hz
  • Supply: 4.5 » 24Vdc
  • Electrical connection: 24" cable
  • Range: dependent on port size
    • Flow: 0.38 » 76L/min (0.1 » 20GPM)
  • Typical stocked units include: 151581, 155421, 155481, 155481BSPP, 165075, 194761BSPP
      • Note: repair kits available for some models
Back to top
 

AW-Lake FlowStat ES economical paddle wheel flow meter

  • Low cost polycarbonate paddle wheel flow meter for inline flow sensing of liquids.
  • Wetted mat'ls: polypropylene, polycarbonate, Buna-N, acetal copolymer, PEEK, SS
  • Media: -6 » 65°C, up to 150PSIg (~10bar)
  • Flow range: set as a 10:1 turn-down ratio of the chosen maximum flow rate
    • 2 » 56L/min (0.5 » 15USGPM)     or
    • 1 » 17L/min (0.25 » 4.5USGPM) with optional low-flow adapter
  • Process connections: ½" NPT
  • Supply: 12»24VDC
  • Output: choice of 4-20mA, pulse, voltage or relay (Form C)
  • Electrical connection: 120" (3m) cable, IP65 (weatherproof)
  • Filtration: recommended 150 micron filter
Back to top
 

AW-Lake FlowStat paddle wheel flow meter

  • Stainless steel paddle wheel flow meter for inline flow sensing of liquids.
  • Wetted mat'ls:316SS, polycarbonate, Buna-N, Acetal Copolymer & PEEK
    • Optional: 3166SS cover and EPR or FKM seals.
  • Media:-6 » 65°C, up to 200PSIg (~14bar)
    • Optional: up to 500PSIg (~34 bar) with 316SS cover
  • Process connections: ½", ¾" or 1" NPT
  • Flow range: dependent on port size - set as a 10:1 turn-down ratio of the chosen maximum flow rate
    • ½": 18 » 56L/min (5 » 15USGPM) or 1 » 17L/min (0.25 » 4.5USGPM) with optional low-flow adapter
    • ¾" & 1": 56 » 190L/min (15 » 50USGPM)
  • Supply: 12»24VDC
  • Output:choice of 4-20mA, pulse, voltage or relay (Form C)
    • Optional: temperature on voltage models
  • Electrical connection: 120" (3m) cable, IP65 (weatherproof)
  • Filtration: recommended 150 micron filter
Back to top
 

Gems Sensors RFA (RotorFlow) paddle wheel flow sensor

  • Paddle wheel flow sensor for visual flow indication & analogue flow measurement
    • Hall effect sensor
  • Materials: polypropylene, brass or stainless steel body
  • Media: dependent on body type
    • -29 » 100°C (65°C ambient), up to 13bar
    • Viscosity: <200SSU
  • Process connections: ¼, ½, ¾ & 1” BSPP (G type) or NPT thread
  • Output: proportional voltage (0 » 10Vdc)
  • Supply: 24Vdc
  • Electrical connection: 24" cable
  • Range: dependent on port size
    • Flow: 0.38 » 76L/min (0.1 » 20GPM)
  • Typical stocked units include: 182099
      • Note: repair kits available for some models
Back to top
 

DualPulse insertion type paddle wheel

  • Wide flow range
  • Suitable for "hot tap" installations to prevent process stop during maintenance
  • BSP or NPT thread
  • Outputs: pulse or optional totaliser / batch controllers (integral or remote mount) with 4-20mA & adjustable flow switches
  • IECEx Ex ia version available
  • Battery operated or 24Vdc
Back to top
 

KEM ZHM / ZHA round (spur) gear flow meters

  • Round (spur) gear, positive displacement flow meter
  • Available with different process connections (NPT & BSP)
  • Available with different flow ranges
  • 316SS or Aluminium bodies
  • IECEx Ex ia models available - refer IECEx link
Back to top
 

KEM SRZ helical gear flow meters

  • Ideal for viscous media
  • Reduced pressure drop
  • Precision machined in Germany
  • Wide range of flow
  • High pressure rating
  • Choice of outputs (pulse or 4-20mA) with integral pickups or electronics
  • Totaliser / batch control & local displays
  • IECEx Ex ia models available - refer IECEx link
Back to top
 

AW round (spur) JV-KG gear flow meters

  • Round (spur) gear, positive displacement flow meter
  • Available with different process connections (NPT & BSP)
  • Available with different flow ranges
  • 316SS (JVS-####), 303SS (JVM-####) or Aluminium (JVA-####) bodies
Back to top
 

AW high pressure JVHS-KG positive displacement round (spur) gear meter

  • Round (spur) gear, positive displacement flow meters for high pressure applications
    • Pressure: up to 1035bar / 15,000PSI
  • Standard with 3/8" MP autoclave thread
    • Available with different process connections on special request
  • Available with three different flow ranges
    • JVHS-12KG: 0.01 » 3.0L/min (0.003 » 0.8GPM)
    • JVHS-20KG: 0.38 » 7.6L/min(0.01 » 2.0GPM)
    • JVHS-30KG: 0.11 » 26.5L/min (0.03 » 7.0GPM)
  • Outputs: very high resolution pulse output (53,000 / 15,900 / 6,600 pulses / gallon)
    • Accuracy: ±0.5% over 10:1 turndown with 30cP fluid
    • Repeatability: ±0.1%
  • Temperature: up to 85°C
  • Materials: 316SS (body, gears & ball bearings), PTFE (o-rings) & Xylan coated steel bolts (SS available on request)
  • Ex models (JVHS-xxKG-EX) also available for hazardous area applications
  • Wide range of pick-ups and electronics are available, including batch controllers and totalisers
    • Ex models also available
Back to top
 

Trimec Flow Products MultiPulse MP oscillating piston flow meter

  • Wide range of flow rates - 0.2 » 330L/min
  • Positive displacement
  • BSP or NPT thread
  • Outputs: pulse or optional totaliser / batch controllers (integral or remote mount) with 4-20mA & adjustable flow switches
  • IECEx Ex ia version available
  • Battery operated or 24Vdc
  • Australian made
Back to top
 

KEM HM turbine flow meters

  • Wide range of process connections (e.g. flanged, threaded, Tri-Clamp, high pressure / temperature connections)
  • Choice of flow ranges and pulse output ranges
  • Couple with KEM pick-ups or displays with batch control & totaliser functions (integral or remote mount)
  • IECEx Ex ia models available - refer IECEx link
Back to top
 

Gems Sensors FT-110 (TurboFlow) OEM turbine flow sensor

  • OEM style turbine flow meter for measuring low flow rates in clean liquids
  • Materials: Nylon 12, PTFE, graphite
  • Media:
    • Flow range: 0.5 » 35L/min (0.13 » 9.2GPM)
    • Viscosity: 0.8 » 16cSt (32 » 81SSU)
    • Filtration: < 50 microns
    • Temperature: -20 » 100°C
    • Pressure: < 200PSIg (13.7bar)
  • Output: frequency (Hz) - NPN sinking open collector
    • NOTE: 1 » 2.2kΩ pull-up resistor required - not supplied
  • Process connections: 17mm tube o-ring, 3/8“ NPT or G3/8" (BSPP) fitting
  • Power: 5»24Vdc
  • Electrical connections: spade terminals, 1m cable or DIN plug (optional p/n 218572 for DIN plug with integral pull-up resistor)
  • Some models stocked
Back to top
 

Lake Monitors R Style flow transmitters

  • Suitable for liquids, oils & gases
  • Choice of aluminium, brass or stainless steel pipe section (NOT glass) - high pressure (240 or 410 bar) & leak free
  • Spring loaded magnetic coupling means mount in any orientation with no flow conditioning required
  • Wide range of thread choices - BSPP (G type), NPT or SAE
  • Output: universal circuit for analogue signals
    • 4»20mA, 0»5VDC & 0»2,000Hz
  • Customisable: threads, flow range, media calibration
  • Fast delivery time with order expediting available on custom designs
  • Bi-directional & reverse flow models also available
  • High temperature models available also
Back to top
 

VTC + VIC integral flow meter display with totaliser

  • Mounts directly into flow meter
  • Choice of inductive or Carrier Frequency pick-ups
  • Push-button programming
  • Weather proof (IP65)
  • Some IECEx Ex ia models available - refer IECEx link
Back to top
 

KEM VTD03 dual pickup carrier-frequency amplifier

Back to top
 

KEM VTE*/P carrier frequency pulse amplifier

Back to top
 

KEM WT.02 + WI.02 integral pulse to analogue converter with interface

Back to top
 

Eletta D series flow meter, totaliser & switch

  • Newest in the Classic range
  • Uses common pipe sections and can be used to upgrade other of the Eletta Classic controllers
  • Programmable, digital back-lit display that can be rotated electronically through 360°
  • Multipoise installation of instrument
  • Isolated 4 - 20mA output linear to flow
  • Frequency output 200 - 1000Hz, linear to flow
  • 2 independent relay outputs for alarms
  • Resettable totaliser function
Back to top
 

Gems Sensors DM21 Rate Meter / Totaliser

  • 8 Digit LCD
  • Accepts pulse inputs from flow sensors
  • Rate & total displayed
  • Programmable features:
    • Update time, minimum number of pulses, and forced zero time
    • Programmable colour change display based on an event (red / green)
  • 90-264Vac or 20-50VAC/DC Supply
  • 9-15VDC powers RFO or FT-110 flow sensors
  • Optional linear analog output relative to rate
  • Standard outputs: two NPN transistors and one relay (2nd relay optional)
  • CE Approved
  • Standard 1/8 DIN size (92 mm x 45mm cutout)
  • Include output 1 & 2 status annunciators
  • Learn how to program here on YouTube
Back to top
 

Gems Sensors M103 Compact Rate Meter / Totaliser

  • Easy to read 8-digit supertwist LCD (4-digit, with legend for rate) with backlighting capability
  • Simple menu driven setup
  • NEMA 4x rated front panel for use in washdown environments
  • Independent scale factors for total, rate and pulsed output
  • 3V lithium battery (1 or 2) provides long life and eliminates the need for external power
    • NOTE: For backlighting or powering the output also order the M103 Power supply
  • Accepts pulse inputs from flow sensors
  • Rate & total displayed
  • Powers light & RFO or FT-110 sensors
  • Learn how to program here on YouTube
Back to top