 |
 |
Eletta S series flow sensor with gauge & switches
- Extremely durable & long lasting flow sensor
- Purely mechanical (requires no power)
- Large gauge (Ø120mm) indication of flow rate
- Direct reading / customised dials available
- Process connection: DN15»40 threads (BSPP or NPT) or DN15»500 DIN / ANSI wafer flanges
- Flow range: varies depending on size of pipe section - refer datasheet
- Repeatability: <2% actual
- Output: standard S2x: 2 x independently adjustable SPDT relays; standard S0x: gauge only
- Enclosure: we stock IP65 standard but IP43 available also
- We carry stock & spare parts to build / repair most common variations. e.g. S2-GL15, S2-GL25, S2-FA50, S25-GL15, S25-GL25, S25-FA50 & more.
- NEW! Upgrade your existing flow switch / indicator to a Combo Unit & get 4-20mA analogue output - ask us how.
 Back to top |
|
 |
 |
New-Flow FW paddle wheel flow indicator
- Wetted materials: 316SS, tempered glass, PTFE (Teflon) & PVDF with no CE mark
- Our local stock (FW-2) has sight glass window on both sides of product
- Suitable for diesel applications
- Stock BSPP (G¼", ½", ¾", 1", 1½" & 2") & NPT (½", 1") models
**NOTE**
For horizontal flow the indicator should be installed with the "bowl" below the pipe centreline.
Back to top |
|
 |
 |
Gems Sensors RFI (RotorFlow) paddle wheel indicator
- Paddle wheel flow indicator for visual flow indication
- Materials: polypropylene, brass or stainless steel body
- Media: dependent on body type
-
- -29 » 100°C (65°C ambient), up to 13bar
- Viscosity: <200SSU
- Process connections: ¼, ½, ¾ & 1” NPT or BSPP (G type) thread
- Range: dependent on port size
- Flow: 0.38 » 76L/min (0.1 » 20GPM)
- Typical stocked units include: 142541, 142542, 155420, 155480, 174596, 180392BSPP, 181683 (repair kits available for some models)
**NOTE**
For horizontal flow the indicator should be installed with the "bowl" below the pipe centreline. Back to top |
|
 |
 |
Lake Monitors B style flow meters
- Suitable for liquids, oils & gases
- Choice of aluminium, brass or stainless steel pipe section (NOT glass) - high pressure (240 or 410 bar) & leak free
- Spring loaded magnetic coupling means mount in any orientation with no flow conditioning required
- Wide range of thread choices - BSPP (G type), NPT or SAE
- Stocked in multiple different flow ranges
- Customisable: threads, flow range, media calibration
- Fast delivery time with order expediting available on custom designs
- Bi-directional & revrse flow models also available
- High temperature models available also
- Requires 74 micron filter (200 mesh screen) minimum
Back to top |
|
|
 |
Eletta TIVG - DP flow indicator
- TIVG has been widely installed in the hydro power generation industry.
Back to top |
|
|
 |
Lake ClearView low cost flow monitors
- Suitable for water or hydraulic oil flow
- Choice of lower pressure, clean water applications only
- Polycarbonate or polysulfone body
- Spring loaded magnetic coupling means mount in any orientation with no flow conditioning required
- Choice of thread alternatives & sizes - BSPP (G type) or NPT with either brass or Ryton port
- Fast delivery time with order expediting available on custom designs
- Requires 74 micron filter (200 mesh screen) minimum
Back to top |
|
|
 |
Lake K & T style hydraulic system analysers
- A complete hydraulic troubleshooting system consisting of:
- Style K: flow meter, precision needle-type load valve and Glyerin filled pressure gauge
- Style T: as above but adds a Thermowell protected temperature gauge
- Small enough to fit in a tool box and built to withstand rigorous industrial use
- Without batteries to fail or other electrical power connections to make, this system will provide a lifetime of simple and reliable operation
- These multi-measurement analyzers simultaneously measure:
- Flow in GPM & L/min
- Pressure in PSIG & Bar
- Temperature in °F & °C
- Accurate measurements can be taken in any mounting orientation, without the straight plumbing required with other analyser systems
- Optional built-in reverse bypass mechanism prevents potential damage from misinstallation or backflow
Back to top |
|
|
 |
Lake WTA hydraulic test analyser
- Simple compact design allows for simultaneous measurement of flow, pressure and temperature on mobile, industrial & agricultural industries
- Can be connected “In Line” between the pump and valve for convenient machine testing
- Manufactured in a painted high quality steel case with removable lid
- Can withstand the most rigorous of use out in the field
- A loading valve allows you to simulate pressure on the hydraulic system without the need to operate all the machine functions in the workshop
- The multistage valve design assures low handle effort and smooth operation over the entire flow and pressure range
- Heat stressed hydraulic fluids can be a major factor in component failure
- The thermometer (calibrated for both °F & °C) is a carefully designed and integrated part of a high quality unit, not a bolted on afterthought
Back to top |
|
