 |
 |
Cerlic MultiTracker with MultiSeries sensors
- Handheld controller for MultiSeries plug and play sensors
- Parameters: sludge blanket profile (Blanko), total suspended solids (Solido) & dissolved oxygen (OxyDuo)
- Datalogging: 250 samples
- Display: backlit graphical LCD
- Alarms: vibration & audio at adjustable set points
- Keypad: push-button programming of all setttings
- Supply: 4 x AA (approx. 2»yrs operation, sensor dependent)
- Cables: 4, 8, 12 or 20m
- Enclosure: IP65
- See it in action - YouTube demo
- NEW! With the latest Firmware update of the MultiTracker (v2.3) the Solido can now store & use three separate calibration curves
- Operators can now datalog for three separate applications (e.g. MLSS, RAS & effluent) with the one device, without having to re-calibrate for each between uses!
- Software & drivers
- TrackerTalk 1.0
- USB-to-Serial converter (now available for up to Windows 10) - to download:
-
- scroll down to Support & Download tab
- then scroll down to Software & Drivers & under the heading of Windows Software & Driver click the link to download the most suitable (& up to date) .zip version of the driver for your computer
- extract the .zip file and follow the on-screen prompts to install the driver to your PC
- NOTE: please do this BEFORE plugged your MultiTracker datakit in for the first time to ensure the correct driver is loaded. Depending on your computer settings this may require Administrator access
- Latest Firmware Update (HEX2_3) - please strictly follow the TrackerTalk upgrade directions when updating the Firmware
 Back to top |
|
|
 |
Cerlic MultiFix controller for MultiSeries sensors
- Fixed controller for MultiSeries plug and play sensors
- Parameters: total suspended solids (Solido - link) & dissolved oxygen (OxyDuo - link)
- Outputs:
- Display: backlit graphical LCD
- Alarms: vibration & audio at adjustable set points
- Keypad: push-button programming of all setttings
- Supply: choice of 12-36VDC, 110/240VAC or universal AC/DC model
- Sensor Cables: 8m (standard) - OEM versions possible
- Enclosure: IP54 / NEMA3
- Temperature: -10 » 50°C
- Stocked Model: 11906024 (DC)
Back to top |
|
|
 |
Cerlic Blanko sludge blanket level (SBL) & profile sensor
- Combines a NIR (near infrared) suspended solids sensor with hydrostatic pressure transducer to accurately plot TSS vs depth for complete sludge blanket profile
- Plug and play connection to the MultiTracker handheld controller
- Range: 0 » up to 20,000mg/L (ppm) or 2% TSS - dependent on sludge
- Depth: up to 19m
- Temperature: 0 » 50°C
- Enclosure: IP68 (handheld MultiTracker IP65)
- Accuracy: ±1% FS (TSS), ±0.5% FS (depth)
- Output: profile via graphical (backlit) display, alarms (vibration & sound) for 2 x adjustable levels (fluff & sludge blanket)
- Datalog up to 250 samples into customised folders before PC sync via supplied cable & software
- Wetted Materials: 316SS, BK7 glass & PUR (cable)
- See it in action - YouTube demo
Back to top |
|
|
 |
Cerlic Solido TSS sensor for RAS / WAS / MLSS
- A high accuracy NIR (near infrared) total suspended solids (TSS) sensor for RAS (return activated sludge) / WAS (waste activated sludge) / MLSS (mixed liquor suspended solids)
- Plug and play connection to the MultiTracker handheld controller
- Range: 0 » up to 50,000mg/L (ppm) or 5% TSS - dependent on sludge
- Depth: up to 12m
- Temperature: 0 » 50°C
- Enclosure: IP68 (handheld MultiTracker IP65)
- Accuracy: ±1% FS (TSS)
- Output: graphical (backlit) display, alarms (vibration & sound) for 2 x adjustable levels (high & low)
- Datalog up to 250 samples into customised folders before PC sync via supplied cable & software
- Wetted Materials: 316SS, BK7 glass & PUR (cable)
- NEW! With the latest Firmware update of the MultiTracker (v2.3) the Solido can now store & use three separate calibration curves
- Operators can now datalog for three separate applications (e.g. MLSS, RAS & effluent) with the one device, without having to re-calibrate for each between uses!
- Head to the MultiTracker page (here) to download the updates
Back to top |
|
|
 |
Cerlic OxyDuo dissolved oxygen (DO) sensor
- Dissolved oxygen (DO) sensor with your choice of optical or electrochemical (Clarke) cell
- Plug and play connection to the MultiTracker handheld controller
- Only ever replace the consummable sensing cell
- Range: 0 » up to 20mg/L (ppm)
- Depth: up to 12m
- Temperature: 0 » 50°C
- Enclosure: IP68 (handheld MultiTracker IP65)
- Accuracy: Electrochemical: ±1% FS, Optical: ±0.1mg/L <5mg/L, ±0.2mg/L > 5mg/L
- Output: graphical (backlit) display, alarms (vibration & sound) for 2 x adjustable levels (high & low)
- Datalog up to 250 samples into customised folders before PC sync via supplied cable & software
- Wetted Materials: sensor cell components, 316SS body & PUR (cable)
Back to top |
|
