Cerlic

Cerlic ITX TSS sensor for MLSS

• A high accuracy, online, NIR (near infrared) total suspended solids (TSS) sensor for MLSS (mixed liquor suspended solids)
• Built-in self-cleaning (NOT clipped on) with water or compressed air - no moving parts for low maintenance
• NO service agreements
• Range: 0 » up to 20,000mg/L (ppm) or 2% TSS - dependent on sludge
• Process connection: handrail or slide rail mount
• Temperature: 0 » 60°C
• Enclosure: IP68 (submersible)
• Life expectancy: sensor 10yrs 
• Accuracy: ±0.5% FS (TSS)
• Outputs: 4»20mA or optional Profibus DP from BB1 (single sensor - link) or BB2 (up to 4 sensors - link) controller
• Wetted Materials: 316SS & BK7 glass
• See the self-cleaning in action - YouTube demo
• See the telescopic rod with rail mounting kit in action - YouTube demo

Back to top

Cerlic ITX-IL in-line TSS sensor for RAS / WAS / DAF thickened sludge

• A high accuracy in-line NIR (near infrared) total suspended solids (TSS) sensor for RAS (return activated sludge) / WAS (waste activated sludge) & some DAF (dissolved air floatation) thickened sludge
• Built-in self-cleaning (NOT clipped on) with water or compressed air - no moving parts for low maintenance
• NO service agreements
• Range: 0 » up to 50,000mg/L (ppm) or 5% TSS - dependent on sludge
• Process connection: hot-tap via isolation valve prevents having to stop process in case of maintenance
• Temperature: 0 » 60°C
• Enclosure: IP65
• Life expectancy: sensor 10yrs 
• Accuracy: ±1% FS (TSS)
• Outputs: 4»20mA or optional Profibus DP from BB1 (single sensor - link) or BB2 (up to 4 sensors - link) controller
• Wetted Materials: 316SS & BK7 glass 

Back to top

Cerlic CMC high concentration TS sensor

• Micowave, high concentraion total solids (TS) sensor
• True-Phase shift microwave technology provides stable signal & prevents empty pipe errors
• No moving parts for long life & low maintenance
• Multiple models to suit various applications:
  
  • CMC FT: flow through model with angled ceramic sensor (antenae) surfaces for self-cleaning
  • CMC RD: flow through model with flush ceramic sensor (antenae) surface for abbrassive applications.  Various coatings available for additional protection.
  • CMC IT: **New** insertion type model with built-in spray cleaning (air or water) with no moving parts.  Suitable for pipes >DN150.
• Designed for digested, dewatered, thickened or primary sluge
• Range: up to 30% TS (300,000mg/L or ppm)
• Process connection: wafer flange for DN50 » 300 or insertion type (CMC ITL) with optional hot-tap assembly
• Conductivity: varies depending on pipe size - refer datasheet
• Process pH: 2.5» 11.5
• Temperature: 0 » 100°C (process), 0 » 60°C (ambient)
• Pressure: PN16 (recommend at least 1.5bar to remove air from sludge / biosolids)
• Supply: choice of 85»264Vac or 24Vdc
• Display: remote mount with supplied 10m cable
• Enclosure: IP65
• Accuracy: ±1% FS (TSS)
• Outputs: 3 x 4-20mA analogue outputs or optional HART
  • TS concentration (%, ppm, mg/L, g/L)
  • Sludge temperature
  • Programmable AUX: line pressure (pressure transducer models), conductivity, signal quality (diagnostics)

Back to top

Cerlic O2X DUO dissolved oxygen sensor (optical or galvanic)

• Built-in self-cleaning (NOT mounted externally) with water or compressed air - no moving parts for low maintenance
  • NO service agreements
• Range: 0 » 20mg/L
• Outputs: 4»20mA or optional Profibus DP from BB1 (single sensor - link) or BB2 (up to 4 sensors - link) controller
• Mounting: submersible sensor (IP68) mounted on 4m spring loaded telescopic rod (fibreglass), slide rail or chain
• Life expectency:
  • Consumable sensing cells: 18»24 months (electrochemical), 2»3yrs luminophore (factory replacement) & 5»10yrs cell (complete optical cell)
  • Sensor: 10yrs
• Temperature: 0»50°C
• Wetted materials: 316SS
• See the telescopic rod with rail mounting kit in action - YouTube demo
• See the self-cleaning in action - YouTube demo

Back to top

Cerlic MultiTracker with MultiSeries sensors

• Handheld controller for MultiSeries plug and play sensors
• Parameters: sludge blanket profile (Blanko), total suspended solids (Solido) & dissolved oxygen (OxyDuo)
• Datalogging: 250 samples
• Display: backlit graphical LCD
• Alarms: vibration & audio at adjustable set points
• Keypad: push-button programming of all setttings
• Supply: 4 x AA (approx. 2»yrs operation, sensor dependent)
• Cables: 4, 8, 12 or 20m
• Enclosure: IP65
• See it in action - YouTube demo
• NEW! With the latest Firmware update of the MultiTracker (v2.3) the Solido can now store & use three separate calibration curves
  • Operators can now datalog for three separate applications (e.g. MLSS, RAS & effluent) with the one device, without having to re-calibrate for each between uses!
• Software & drivers
  • TrackerTalk 1.0
  • USB-to-Serial converter (now available for up to Windows 10) - to download:
    • • scroll down to Support & Download tab
      • then scroll down to Software & Drivers & under the heading of Windows Software & Driver click the link to download the most suitable (& up to date) .zip version of the driver for your computer
      • extract the .zip file and follow the on-screen prompts to install the driver to your PC
      • NOTE: please do this BEFORE plugged your MultiTracker datakit in for the first time to ensure the correct driver is loaded.  Depending on your computer settings this may require Administrator access
  • Latest Firmware Update (HEX2_3) - please strictly follow the TrackerTalk upgrade directions when updating the Firmware

Back to top

Cerlic Blanko sludge blanket level (SBL) & profile sensor

• Combines a NIR (near infrared) suspended solids sensor with hydrostatic pressure transducer to accurately plot TSS vs depth for complete sludge blanket profile
• Plug and play connection to the MultiTracker handheld controller
• Range: 0 » up to 20,000mg/L (ppm) or 2% TSS - dependent on sludge
• Depth: up to 19m
• Temperature: 0 » 50°C
• Enclosure: IP68 (handheld MultiTracker IP65)
• Accuracy: ±1% FS (TSS), ±0.5% FS (depth)
• Output: profile via graphical (backlit) display, alarms (vibration & sound) for 2 x adjustable levels (fluff & sludge blanket)
• Datalog up to 250 samples into customised folders before PC sync via supplied cable & software
• Wetted Materials: 316SS, BK7 glass & PUR (cable)
• See it in action - YouTube demo

Back to top

Cerlic Solido TSS sensor for RAS / WAS / MLSS

• A high accuracy NIR (near infrared) total suspended solids (TSS) sensor for RAS (return activated sludge) / WAS (waste activated sludge) / MLSS (mixed liquor suspended solids)
• Plug and play connection to the MultiTracker handheld controller
• Range: 0 » up to 50,000mg/L (ppm) or 5% TSS - dependent on sludge
• Depth: up to 12m
• Temperature: 0 » 50°C
• Enclosure: IP68 (handheld MultiTracker IP65)
• Accuracy: ±1% FS (TSS)
• Output: graphical (backlit) display, alarms (vibration & sound) for 2 x adjustable levels (high & low)
• Datalog up to 250 samples into customised folders before PC sync via supplied cable & software
• Wetted Materials: 316SS, BK7 glass & PUR (cable)
• NEW! With the latest Firmware update of the MultiTracker (v2.3) the Solido can now store & use three separate calibration curves
  • Operators can now datalog for three separate applications (e.g. MLSS, RAS & effluent) with the one device, without having to re-calibrate for each between uses!
  • Head to the MultiTracker page (here) to download the updates

Back to top

Cerlic OxyDuo dissolved oxygen (DO) sensor

• Dissolved oxygen (DO) sensor with your choice of optical or electrochemical (Clarke) cell
  • Swappable at any time
• Plug and play connection to the MultiTracker handheld controller
• Only ever replace the consummable sensing cell
• Range: 0 » up to 20mg/L (ppm)
• Depth: up to 12m
• Temperature: 0 » 50°C
• Enclosure: IP68 (handheld MultiTracker IP65)
• Accuracy: Electrochemical: ±1% FS, Optical: ±0.1mg/L <5mg/L, ±0.2mg/L > 5mg/L
• Output: graphical (backlit) display, alarms (vibration & sound) for 2 x adjustable levels (high & low)
• Datalog up to 250 samples into customised folders before PC sync via supplied cable & software
• Wetted Materials: sensor cell components, 316SS body & PUR (cable)

Back to top

Cerlic CBX & CBX+ sludge blanket level (SBL) & profile sensor

• Combines NIR suspended solids sensor with accurate depth measurement to provide sludge blanket profile
• Analogue outputs for: sludge blanket level, fluff (unsettled sludge) level, real-time TSS concentration & real-time sensor depth
• 4-20mA or Profibus DP output (optional)
• Completely self-cleaning
• Two models:
  • CBX: range up to 2% TSS (depending on sludge type)
  • CBX+: range up to 5% TSS (depending on sludge type)
• See it in action - YouTube demo

Back to top

Cerlic BB2 centralised control box for X-series sensors

• Controls up to 4 sensors at once, including self-cleaning solenoids
• Outputs: 2 x 4-20mA as a standard, but expandable up to 4 x 4-20mA for 4 online sensors
  • Use for analytical variables (TSS / DO etc) or temperature
  • Profibus output optional
• Supply: now available with 24Vdc without having to change sensors!

Back to top

Cerlic BB1 central control box for X-series sensors

• Controls just one sensor
• Outputs: all outputs from one sensor
  • 2 x 4-20mA as a standard, but expandable up to 4 x 4-20mA for CBX with full range of outputs (sludge blanket level, fluff level, real-time depth & concentration)
    • Use for analytical variables (TSS / DO etc) or temperature
    • Profibus output optional
• Supply: 85 - 230Vac

Back to top

Cerlic pHx (pH) & ReX (ORP or redox) sensors

Back to top