Eletta SP-G in-line flow switch

  • In-line, rugged shuttle type flow switch
  • Immune to magnetic fields
  • Available in water & oil configurations
  • Orientation: vertical or horizontal with minimal flow conditioning
  • Process connection: G½", ¾"
  • Adjustable range: 1.5 » 30L/min
    • Flow velocity: 0 » 3.5m/sec
  • Output: SPDT microswitch
  • Temperature: -20 » 90°C (others available)
  • Pressure: 25bar
  • Enclosure: IP43
  • Stocked models: SP-G15 (oil & water); SP-G20 (oil & water)
Back to top
  • SP-G - datasheet (PDF)
  • SP-G - manual (PDF)
  •  

    Eletta SP-GA in-line, adjustable flow switch

    • In-line, rugged shuttle type flow switch
    • Low flow set-point with high flow capacity with low pressure drop
    • Immune to magnetic fields
    • Available in water & oil configurations
    • Orientation: vertical or horizontal with minimal flow conditioning
    • Process connection: G1, 1½" (BSPP)
    • Adjustable range: 3 » 70L/min
      • Flow range: 0 » 300L/min
    • Output: SPDT microswitch
    • Temperature: -20 » 90°C (others available)
    • Pressure: 25bar
    • Enclosure: IP43
    • Stocked models: SP-GA (oil & water) with 1½" process connection
    Back to top
  • SP-GA - datasheet (PDF)
  • SP-GA - manual (PDF)
  •  

    Eletta PR1 paddle type flow switch

    • Rugged flow switch for liquids
      • Teflon sleeve mounting allows the paddle to swing in both directions so can handle backflow (switches only in one direction)
    • Wetted parts: copper, 316 stainless steel, nitrile (HNBR)
    • Process connection: 1” BSP
    • Pipe sizes: 2 »10" (DN50 » 250)
    • Output: SPDT microswitch (relay)
    • Pressure: 25 bar
    • Temperature: -20 » 125°C
    • Adjustable range: refer manual for flow setting vs pipe size & paddle length
    • Enclosure: IP65 (weatherproof)
    • Stocked models: PR1-IP65
    Back to top
  • PR1 - datasheet (PDF)
  • Eletta PR1 - manual (PDF)
  •  

    Eletta M series

    • Blind flow meter, high accuracy, 1:10 turn down
      • Liquids and non hazardous gases
      • Built-in Pressure vs Temperature curves for gases!
    • 2 wire loop powered 4 - 20mA output
    • Controller interface common to all Classic pipe sections 
    • Using the Eletta Combo plate, can be added to existing S series or even TIVG installations to provide analogue output in addition to the indicator / flow switch functions of the existing control.
    Back to top
  • M series - datasheet (PDF)
  • M3 Combination Instrument flyer (PDF)
  • DP Orifice units - M series weights + dimensions (PDF)
  • DP Orifice units - M series measuring ranges (PDF)
  • Eletta product range (PDF)
  • Eletta ordering guide (Rev.3.0) - form (PDF)
  •  

    Eletta D series flow meter, totaliser & switch

    • Newest in the Classic range
    • Uses common pipe sections and can be used to upgrade other of the Eletta Classic controllers
    • Programmable, digital back-lit display that can be rotated electronically through 360°
    • Multipoise installation of instrument
    • Isolated 4 - 20mA output linear to flow
    • Frequency output 200 - 1000Hz, linear to flow
    • 2 independent relay outputs for alarms
    • Resettable totaliser function
    Back to top
  • D-series - datasheet (PDF)
  • Eletta product range (PDF)
  • Eletta ordering guide (Rev.3.0) - form (PDF)
  • DP Orifice units - D, V, S, R & A series weights + dimensions (PDF)
  • DP Orifice units - D, V, S, R & A series measuring ranges (PDF)
  •  

    Eletta R series

    • Blind flow monitor with analogue 4-20mA and frequency outputs
    • Alao available with Hart® protocol
    • Uses common pipe sections across the Eletta CLassic range
    Back to top
  • R Series - datasheet (PDF)
  • Eletta product range (PDF)
  • Eletta ordering guide (Rev.3.0) - form (PDF)
  •  

    Eletta S series flow sensor with gauge & switches

    • Extremely durable & long lasting flow sensor
      • Purely mechanical (requires no power)
    • Large gauge (Ø120mm) indication of flow rate
      • Direct reading / customised dials available
    • Process connection: DN15»40 threads (BSPP or NPT) or DN15»500 DIN / ANSI wafer flanges
    • Flow range: varies depending on size of pipe section - refer datasheet
      • 0.4 » 25,000L/min
    • Repeatability: <2% actual
    • Output: standard S2x: 2 x independently adjustable SPDT relays; standard S0x: gauge only
    • Enclosure: we stock IP65 standard but IP43 available also 
    • We carry stock & spare parts to build / repair most common variations.  e.g. S2-GL15, S2-GL25, S2-FA50, S25-GL15, S25-GL25, S25-FA50 & more.
    • NEW! Upgrade your existing flow switch / indicator to a Combo Unit & get 4-20mA analogue output - ask us how.
    Back to top
  • S series - datasheet (PDF)
  • The new M + S series Combo Unit (PDF)
  • S series application examples (PDF)
  • Orifice plate sensors - how Eletta differential pressure works (SWF)
  • S series - manual (PDF)
  • Eletta product range (PDF)
  • Eletta ordering guide (Rev.3.0) - form (PDF)
  • DP Orifice units - D, V, S, R & A series weights + dimensions (PDF)
  • DP Orifice units - D, V, S, R & A series measuring ranges (PDF)
  •  

    Eletta V series flow switch

    • Extremely durable & long lasting flow switch
    • Purely mechanical - requires no power to operate
    • Process connection: DN15»40 threads (BSPP or NPT) or DN15»500 DIN / ANSI wafer flanges
    • Flow range: varies depending on size of pipe section - refer datasheet
      • 0.4 » 25,000L/min
    • Repeatability: <2% actual
    • Output: standard independently adjustable SPDT micro switch
    • Enclosure: we stock IP65 standard but IP43 available also 
    • We carry stock & spare parts to build / repair most common variations.  e.g. V15-GL15, V15-GL25, V15-GL40.
    • NEW! with flow indication window - completely reverse compatible!
    Back to top
  • V series - datasheet (PDF)
  • V-series upgrade with indicating window (PDF)
  • Eletta product range (PDF)
  • Eletta ordering guide (Rev.3.0) - form (PDF)
  • DP Orifice units - D, V, S, R & A series weights + dimensions (PDF)
  • DP Orifice units - D, V, S, R & A series measuring ranges (PDF)
  •  

    Eletta TIVG - DP flow indicator

    • TIVG has been widely installed in the hydro power generation industry.
    Back to top
  • TIVG - datasheet (PDF)
  • TIVG-F M310 (PDF)