AW-Lake Company

AW round (spur) JV-KG gear flow meters

• Round (spur) gear, positive displacement flow meter
• Available with different process connections (NPT & BSP)
• Available with different flow ranges
• 316SS (JVS-####), 303SS (JVM-####) or Aluminium (JVA-####) bodies

Back to top

AW high pressure JVHS-KG positive displacement round (spur) gear meter

• Round (spur) gear, positive displacement flow meters for high pressure applications
  • Pressure: up to 1035bar / 15,000PSI
• Standard with 3/8" MP autoclave thread
  • Available with different process connections on special request
• Available with three different flow ranges
  • JVHS-12KG: 0.01 » 3.0L/min (0.003 » 0.8GPM)
  • JVHS-20KG: 0.38 » 7.6L/min(0.01 » 2.0GPM)
  • JVHS-30KG: 0.11 » 26.5L/min (0.03 » 7.0GPM)
• Outputs: very high resolution pulse output (53,000 / 15,900 / 6,600 pulses / gallon)
  • Accuracy: ±0.5% over 10:1 turndown with 30cP fluid
  • Repeatability: ±0.1%
• Temperature: up to 85°C
• Materials: 316SS (body, gears & ball bearings), PTFE (o-rings) & Xylan coated steel bolts (SS available on request)
• Ex models (JVHS-xxKG-EX) also available for hazardous area applications
• Wide range of pick-ups and electronics are available, including batch controllers and totalisers
  • Ex models also available

Back to top

Lake Monitors B style flow meters

• Suitable for liquids, oils & gases
• Choice of aluminium, brass or stainless steel pipe section (NOT glass) - high pressure (240 or 410 bar) & leak free
• Spring loaded magnetic coupling means mount in any orientation with no flow conditioning required
• Wide range of thread choices - BSPP (G type), NPT or SAE
• Stocked in multiple different flow ranges
• Customisable: threads, flow range, media calibration
• Fast delivery time with order expediting available on custom designs
• Bi-directional & revrse flow models also available
  • See how these work - YouTube video
• High temperature models available also
• Requires 74 micron filter (200 mesh screen) minimum

Back to top

Lake ClearView low cost flow monitors

• Suitable for water or hydraulic oil flow
• Choice of lower pressure, clean water applications only
  • Polycarbonate or polysulfone body
• Spring loaded magnetic coupling means mount in any orientation with no flow conditioning required
• Choice of thread alternatives & sizes - BSPP (G type) or NPT with either brass or Ryton port
• Fast delivery time with order expediting available on custom designs
• Requires 74 micron filter (200 mesh screen) minimum

Back to top

Lake Monitors M style flow switch

• Suitable for liquids, oils & gases
• Choice of aluminium, brass or stainless steel pipe section (NOT glass) - high pressure (240 or 410 bar) & leak free
• Spring loaded magnetic coupling means mount in any orientation with no flow conditioning required
• Wide range of thread choices - BSPP (G type), NPT or SAE
• Output: single or double SPDT relay output - adjustable in-line
• Customisable: threads, flow range, media calibration
• Fast delivery time with order expediting available on custom designs
• Bi-directional & reverse flow models also available
• High temperature models available also

Back to top

AW-Lake FlowStat ES economical paddle wheel flow meter

• Low cost polycarbonate paddle wheel flow meter for inline flow sensing of liquids.
• Wetted mat'ls: polypropylene, polycarbonate, Buna-N, acetal copolymer, PEEK, SS
• Media: -6 » 65°C, up to 150PSIg (~10bar)
• Flow range: set as a 10:1 turn-down ratio of the chosen maximum flow rate
  • 2 » 56L/min (0.5 » 15USGPM)     or
  • 1 » 17L/min (0.25 » 4.5USGPM) with optional low-flow adapter
• Process connections: ½" NPT
• Supply: 12»24VDC
• Output: choice of 4-20mA, pulse, voltage or relay (Form C)
• Electrical connection: 120" (3m) cable, IP65 (weatherproof)
• Filtration: recommended 150 micron filter

Back to top

AW-Lake FlowStat paddle wheel flow meter

• Stainless steel paddle wheel flow meter for inline flow sensing of liquids.
• Wetted mat'ls:316SS, polycarbonate, Buna-N, Acetal Copolymer & PEEK
  • Optional: 3166SS cover and EPR or FKM seals.
• Media:-6 » 65°C, up to 200PSIg (~14bar)
  • Optional: up to 500PSIg (~34 bar) with 316SS cover
• Process connections: ½", ¾" or 1" NPT
• Flow range: dependent on port size - set as a 10:1 turn-down ratio of the chosen maximum flow rate
  • ½": 18 » 56L/min (5 » 15USGPM) or 1 » 17L/min (0.25 » 4.5USGPM) with optional low-flow adapter
  • ¾" & 1": 56 » 190L/min (15 » 50USGPM)
• Supply: 12»24VDC
• Output:choice of 4-20mA, pulse, voltage or relay (Form C)
  • Optional: temperature on voltage models
• Electrical connection: 120" (3m) cable, IP65 (weatherproof)
• Filtration: recommended 150 micron filter

Back to top

AW Proscan turbidity sensor for dairy applications (A3 certified)

• See more in this short YouTube video

Back to top

Lake Monitors R Style flow transmitters

• Suitable for liquids, oils & gases
• Choice of aluminium, brass or stainless steel pipe section (NOT glass) - high pressure (240 or 410 bar) & leak free
• Spring loaded magnetic coupling means mount in any orientation with no flow conditioning required
• Wide range of thread choices - BSPP (G type), NPT or SAE
• Output: universal circuit for analogue signals
  • 4»20mA, 0»5VDC & 0»2,000Hz
• Customisable: threads, flow range, media calibration
• Fast delivery time with order expediting available on custom designs
• Bi-directional & reverse flow models also available
• High temperature models available also

Back to top

Lake K & T style hydraulic system analysers

• A complete hydraulic troubleshooting system consisting of:
  • Style K: flow meter, precision needle-type load valve and Glyerin filled pressure gauge
  • Style T:  as above but adds a Thermowell protected temperature gauge
• Small enough to fit in a tool box and built to withstand rigorous industrial use
• Without batteries to fail or other electrical power connections to make, this system will provide a lifetime of simple and reliable operation
• These multi-measurement analyzers simultaneously measure:
  • Flow in GPM & L/min
  • Pressure in PSIG & Bar
  • Temperature in °F & °C
• Accurate measurements can be taken in any mounting orientation, without the straight plumbing required with other analyser systems
• Optional built-in reverse bypass mechanism prevents potential damage from misinstallation or backflow

Back to top

Lake WTA hydraulic test analyser

• Simple compact design allows for simultaneous measurement of flow, pressure and temperature on mobile, industrial & agricultural industries
• Can be connected “In Line” between the pump and valve for convenient machine testing
• Manufactured in a painted high quality steel case with removable lid
  • Can withstand the most rigorous of use out in the field
• A loading valve allows you to simulate pressure on the hydraulic system without the need to operate all the machine functions in the workshop
  • The multistage valve design assures low handle effort and smooth operation over the entire flow and pressure range
• Heat stressed hydraulic fluids can be a major factor in component failure
  • The thermometer (calibrated for both °F & °C) is a carefully designed and integrated part of a high quality unit, not a bolted on afterthought

Back to top