TriOS TriBox3 centralised sensor controller

  • For centralised controll & programming of up to 4 x TriOS sensors
  • Outputs:
    • Modbus, 4-20mA (6 OFF), SPDT relay, ethernet etc
    • Datalogger: yes
    • Sensor self-cleaning: built-in solenoid valve (air)
  • Enclosure:IP65
    • Temp: 0»40°C (ambient)
  • Supply: universal
    • 85»265VAC &
    • 12»24VDC
Back to top
  • TriBox3 - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS TriBox Mini low cost controller for one sensor

    • Lower cost controller for up to two sensors
    • Outputs:
      • Modbus, 4-20mA (6 OFF), SPDT relay, Wi-Fi
      • Datalogger: yes
    • Supply: universal
      • 85»265VAC &
      • 12»24VDC
    • Requires external solenoid valve for self-cleaning (refer pdf)
    Back to top
  • TriBox Mini - datasheet (PDF)
  • TriOS solenoid - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS G2 Interface Box for all G2 sensors

    • G2 interface for local / network configuration and communication with G2 compatible sensors.
    • Supply: 24VDC
    • Outputs: Modbus, ethernet, Wi-Fi & ethernet models available
    • Enclosure: IP20 (NOT weatherproof)
      • Temp: 0»40°C
    Back to top
  • G2 Interface Box - datasheet (PDF)
  • G2 Wi-Fi interface Box - datasheet (JPG)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS HS100 G2 DIN rail interface for all TriOS G2 sensors

    • G2 interface for local / network configuration and communication with G2 compatible sensors.
    • Supply: 24VDC
    • Outputs: Modbus, ethernet, Wi-Fi
    • Enclosure: IP20 (NOT weatherproof)
      • Temp: 0»40°C
    Back to top
  • HS100 G2 DIN rail module - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS OPUS hyperspectral process sensor

    • Measurement technology:attenuation
      • Wavelength: full spectrum from 200 » 360nm (hyperspectral)
      • Resolution: 0.8nm/pixel
      • Compensation: turbidity
    • Pathlength: customised - 0.3 » 50mm
    • Used for measuring: nitrate (NO3), nitrite (NO2), COD eq (chemical oxygen demand equivalent), BOD eq (biological oxygen demand), DOC eq (dissolved organic carbons), TOC eq (total organic compound), TSS eq (total suspended solids), KHP (potassium acid pthalate), SAC 254 (organic matter), COD-SAC eq & BOD-SAC eq
    • Self-cleaning: compressed air & unique hydrophobic nano-coating of lenses
    • Wetted materials: stainless steel (316Ti / 316L) or titanium (sea water applications)
    • Supply: 12 » 24Vdc (±10%)
    • Interface: digital - ethernet, RS-232, RS-485 (Modbus RTU)
      • Datalogger: yes, 2GB internal
    • Temperature: 2 » 40°C
    • Pressure: 30bar (SubConn connection), 3bar (fixed cable) or 1bar (in flowcell)
    • Ingress protection: IP68
    Back to top
  • OPUS - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS LISA UV optical SAC254 (or UVT) sensor

    • The new (previously LISA-254) low-cost state-of-the-art SAC254 instrument from TriOS optical sensors.
      • Application dependent calibration for COD, BOD, TOC or UVT can be done, offering online measurement of this parameters at a fraction of investment and service costs of other SAC254 probes or classical cabinet analysers. 
    • LISA can be customized with optical path lengths of 1, 2, 5, 10 or 50 mm to cover almost every application. The use of a second wavelength offers automatical internal turbidity correction of the SAC value.
    • Innovative long lifetime UV-LED technology and a robust design are the key-features of LISA.
      • Like every TriOS sensor, LISA has nano coated windows to avoid fouling. Combined with airblast cleaning service costs are reduced to a minimum.
    • The unique TriOS G2 interface allows easy and fast 3rd party integration to existing SCADA systems or dataloggers, beside the use within the wide range of TriOS controllers and handheld devices.
      • Additional to the digital outputs, LISA is available with direct 4..20 mA interface.
    • The titanium version of LISA allows the use in very harsh environments (e.g. high chlorine concentrations). 
    Back to top
  • LISA UV (SAC254) - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS NICO low cost optical nitrate meter

    • TriOS has now developed NICO: a UV photometer for the determination of nitrate.
    • The four detection channels enable a precise optical determination of nitrate by absorption, taking into account turbidity and organic substances that pose a problem for many products currently on the market.
    • An internal temperature correction additionally increases stability of the measured values.
    • Equipped with our innovative G2 interface with web browser configuration, internal data logger, flexible protocols and data outputs, NICO boasts features that are much more advanced than comparable devices higher available on the market at a very advantageous price. a standardized spare parts and consumables system.
      • The cutting-edge G2 interface not only enables quick integration into third-party systems, but also use of the wide range of accessories for our devices. 
    Back to top
  • NICO - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS VIPER optical hyperspectral sensor

    • VIPER measures hyperspectral attenuation and transmission coefficients in the wavelength range of 360nm » 750nm, enabling detailed determination of multiple parameters at the same time.
      • The light source is provided by 5 selected, energy-saving LEDs that guarantee a long service life and stable measurement data.
    • VIPER can be used in different media as it is available in multiple path lengths, both in stainless steel or titanium housing.
    • Typical applications for VIPER are water quality monitoring, colour measurements of aqueous solutions or quality monitoring of drinking water.
      • Additional parameters can be installed by means of software if necessary at a later time.
    • Like all TriOS sensors, VIPER is equipped with a nano-coated optical window that protects against fouling. 
    • Equipped with our innovative G2 interface with web browser configuration, internal data logger, flexible protocols and data outputs, VIPER boasts features that are much more advanced than comparable devices higher available on the market at a very advantageous price. a standardized spare parts and consumables system.
      • The cutting-edge G2 interface not only enables quick integration into third-party systems, but also use of the wide range of accessories for our devices
    Back to top
  • VIPER - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS LISA colour optical colourimetry sensor

    • LISA color is the new low-cost colour probe in the TriOS family.
    • The key features of the probe are longevity with innovative LED technology, the rugged and smart housing for maximum flexibility of use as well as the novel and intuitive user interfa 
    • The unique TriOS G2 interface allows easy and fast 3rd party integration to existing SCADA systems or dataloggers, beside the use within the wide range of TriOS controllers and handheld devices.
      • Additional to the digital outputs, LISA is available with direct 4..20 mA interface.
    Back to top
  • LISA colour - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS enviroFlu optical oil in water (PAH) meter

    • Operating principle: fluorescence
    • Used for: PAH (polycyclic aromatic hydrocarbons) detection in water
      • Typical applications are discharge monitoring of airports and factories, leakage detection and many others.
    • enviroFlu is a new generation of high sensitive submersible sensors for oil-in-water measurement. The used UV fluorescence principle for detection is much more sensitive than any other existing detection principle, like infrared scattering, etc. This allows the detection of PAH traces in water down to single ppb levels (e.g. in drinking water or condensate applications).
    • The sensors can be used either in stationary or portable applications.
    • A new innovative nano-coating on the lenses is preventing the optics from fouling and oil-films, making the enviroFlu-HC longterm stable and virtually maintenance free.
    • In addition, the enviroFlu-HC can be used with an compressed air cleaning system. For a chemical-free check on location solid standards, so called SolidCAL's, are available.
    • On request special application requirements can be met by changing the filter combinations, possible for example is an enviroFlu-BT for determination of BTX in water.
    • The enviroFlu-BT is also available in a deepsea version for operation in water depth down to 6,000 m (enviroFlu DS).
    Back to top
  • enviroFlu - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS nanoFlu low cost, miniature, optical, fluorometer

    • the nanoFlu is a low-priced, submersible and miniature fluorescence sensor for highly precise & selective measurement of CDOM (coloured dissolved organic matter, yellow substances), rhodamine, chlorophyll A in green algae or phycocyanin in cyanobacteria.
    • Operating principle: fluoresence
    • Measuring range: 0 - 200µg/L
    • Accurancy: ± 3 %
    • Media:
      • Temperature: 2 - 40°C
      • Pressure: 3bar (fixed cable) or 30bar (SubConn connector)
      • Inflow velocity: 0.1 - 10 m/sec
      • Ingress: IP68 
    • Long-term stability of measurements is ensured by the combination of low power consumption & innovative coating of the optical window, as an energy efficient and environmentally friendly antifouling solution.
    • The submersible nanoFlu can be used in diverse range of applications including the realtime monitoring of:
      • sea, river or freshwater reservoir systems
      • incoming / outgoing flow at drinking & wastewater treatment plants
      • potential filter membrane leaks during rhodamine testing
    • Internal reference signals of the high performance LEDs used for fluorescence excitation compensate ageing effects and temperature influences.
    • G2 interface
    Back to top
  • TriOS catalogue (2018) (PDF)
  • nanoFlu - brochure datasheet (2018) (PDF)
  •  

    TriOS matrixFlu UV optical fluorescence measurement sensor

    • Our high-end matrixFlu fluorometer combines multiple excitation and detection wavelengths for fluorescence measurements in a single device that boasts a highly compact design. MatrixFlu boasts extensive features that go significantly beyond what's available on the market today.
      • The special optical arrangement of excitation and detection channels enables not only single values to be determined, but also a 3x4 or 4x4 matrix of wavelength combinations, depending on type.
      • This allows quasi synchronous in-situ detection of EEMs (Emission Excitation Matrices).
    • matrixFlu is primarily designed for the detection of PAH's (polycyclic hydrocarbons), FDOM (fluorescent organic material), and tryptophan (aromatic amino acid).
    • State-of-the-art, specially selected LEDs are used for fluorescence excitation.
    • The stability of measured values is boosted by an internal temperature correction.
    • Equipped with our innovative G2 interface with web browser configuration, internal data logger, flexible protocols and data outputs,
      • The state-of-the-art G2 interface not only ensures quick integration into third-party systems, but also use of the wide range of accessories for our devices.
    Back to top
  • matrixFlu UV - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS surFlu optical oil film on water detection sensor

    • Oil spills and related oil pollution pose a potential risk for businesses that use oils or lubricants in their processes in any way. Alongside our world-leading enviroFlu (refer separate listing) for the detection of very small amounts in water, we now offer surFlu for the detection of oil films on water.
    • State-of-the-art, stable UV LED technology for fluorescence excitation and multiple detection channels for reliable detection of smallest oil films on water enable universal application of the device. Multi-channel detection ensures reliable differentiation from biogenic films (which are caused e.g. by dead algae), foliage, humic substances, undulations, thus avoiding false alarms.
    • The special geometry of the optics allows large variance in the distance between sensor and water surface, so that even highly fluctuating water levels in basins, gullies, streams or rivers will have no impact on the measuring signal. The stability of measured values is boosted by an internal temperature correction.
    • Equipped with our innovative G2 interface with web browser configuration, internal data logger, flexible protocols and data outputs, surFlu boasts extensive features that go significantly beyond what's available on the market today. 
      • The state-of-the-art G2 interface not only ensures quick integration into third-party systems, but also use of the wide range of accessories for our devices. 
    Back to top
  • surFlu - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS microFlu CDOM, chlorophyll or cyanobacteria miniature fluorometer

    • Discontinued - see nanoFlu above
    • Used for: CDOM, chlorophyll or cyanobacteria miniature fluorometer
    • microFlu fluorometers are low-cost, miniature and submersible for high precision, selective measurement of CDOM (Coloured Dissolved Organic Matter), chlorophyll-A or cyanobacteria. The combination of low power consumption, innovative nano coating as energy and environmental neutral fouling protection and longterm stability makes it suitable for monitoring in rivers, lakes, seawater and for all applications in the field of water quality and wastewater monitoring.
    • Internal reference measurement of the emitted light compensates aging effects of the high-efficient LEDs, used for fluorescence excitation. 
    Back to top
  • microFlu - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS RAMSES spectral imaging radiometer for radiance or irradiance in UV, VIS & UV/VIS

    • RAMSES radiometer are stand-alone and highly integrated hyperspectral radiometer for the UV, VIS and/or UV/VIS spectral range.
      • Small size and very low power consumption make them suitable for hand-held and autonomous applications.
    • The RAMSES radiometer family is especially designed for combining precision hyperspectral light measurement with a maximum of flexibility. The modular measurement system reduces the price and many accessories as well as custom made solutions grant a broad range of applications like installations on ships, handheld usage or autonomous measurements in remote places, like the Arctic or Antarctic.

     

    Back to top
  • RAMSES - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS sensor mounting clamps

    • Available in multiple sizes, these mounting clamps can be used to mount almost any of the TriOS sensors.
    • NOTE: for best performance always mount sensors at a slight angle to prevent the entrapment of air bubbles on the sensing surface
    Back to top
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS AirShot

    • Self-contained system provides instant pressuried air cleaning for use with all TriOS sensors where compressed air isn't readily available
    • Supply: 100 » 240VAC (max. 4A)
    • Temp: -5 » 35°C
    • Encl: IP44 for venting
    • Weight: ~4kg
    • Cleaning: up to 7 bar
      • Freq: (std) is 15secs every 15mins, (max) up to 6secs every 2mins (@ 20°C)
      • Output: pulsed spray
    • Connections: 3m power cable supplied, 5m comms cable between compressor & TriOS controller (TriBox3 or TriBox Mini), 10m air tube between compressor & valve (cannot be shortened) and 5m air tube between valve & sensor fitting (can be shortened).
    Back to top
  • AirShot - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS ultrasonic flowcell

    • Just like a standard flowcell, but fitted with ultrasonic cleaning to reduce maintenance of your TriOS photometers like the OPUS, NICO & LISA!
      • Suitable for all photometers with path lentgh up to 10mm
    • Built-in viewing window allows for quick inspection of the sensor
    • Supply: 12 » 24VDC (±10%). ~15W
    • Temperature: -20 » 70°C (ambient)
    • Pressure: 1 bar (max.)
    • Process connections: tube pushfittings - 8mm (inlet) & 6mm (outlet)
    • Through flowrate: 2 » 4L/min
    • Enclosure: IP64
    • Mat'ls: Polyoxymethylene (POM)
    • Coming soon - flurometer version
    Back to top
  • Ultrasonic flow cell (photometers) - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS flowcells

    • Available in different sizes for the various TriOS sensors
    • Pressure: 1 bar (max.)
    • Process connections: tube pushfittings - 8mm (inlet) & 2 x 6mm (outlet)
    • Through flowrate: 2 » 4L/min
    Back to top
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS sensor mounting floats

    • For one or two sensors - NOTE: a specific unit is to be used with the enviroFlu sensor
    Back to top
  • TriOS sensor float with wiper (JPG)
  • Sensor float for one sensor (JPG)
  • Sensor float for two sensors (JPG)
  • Sensor float for enviroFlu (JPG)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS BUOY-150 custom built buoy system for environmental monitoring

    Back to top
  • BUOY-150 - datasheet (PDF)
  • Buoy sensor frame (JPG)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS clear water & immersion turbidity sensor

    Back to top
  • Turbidity Immersion - datasheet (PDF)
  • Turbidity Clear Water - datasheet (PDF)
  • Clear Water Turbidity - sampling.JPG (JPG)
  •  

    TriOS ORP / redox digital differential sensor

    Back to top
  • ORP Digital Differential - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS ORP / redox digital sensor

    Back to top
  • ORP Digital - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS pH digital differential sensor

    Back to top
  • pH Digital Differential - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS pH digital sensor

    Back to top
  • pH Digital - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS conductivity sensor

    Back to top
  • Conductivity - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS free chlorine sensor

    Back to top
  • Free Chlorine - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)
  •  

    TriOS chlorine dioxide sensor

    Back to top
  • Chlorine Dioxide - datasheet (PDF)
  • TriOS catalogue (2018) (PDF)